Grease Jockey Pump |
||
| Description | Air Pump System | Electric Pump System | Type | Positive displacement, air actuated | Positive displacement gear pump, electric motor driven |
| Construction-Body | Cast aluminum | Cast aluminum |
| Lubricant/Viscosity | NLGI #00 or #0, 55 SUS @ 100 °F
(ISO9 @ 40°C) to 250 SUS @ 210 °F (ISO54 @ 100°C) |
NLGI #00 or #0, 55 SUS @ 100 °F
(ISO9 @ 40°C) to 250 SUS @ 210 °F (ISO54 @ 100°C) |
| Output Volume | 1.5 cu. in. per stroke (24.6 cc) | 2.0 cu. in. per min. (32.8 cc) |
| Inlet Air Supply | 90 to 150 psi (6.1 to 10.2 Bar) | N.A. |
| Operating Pressure | 360 to 1,350 psi (24.5 to 91.9 Bar) | 1,000 psi (68.0 Bar) |
| Air-to-Lube Ratio (Max.) | 9:1 | N.A. |
| Solenoid Voltage | 12 or 24 VDC | N.A. |
| Motor Voltage | N.A. | 12 or 24 VDC |
| Weight (empty) with PVC Reservoir | 10.5 lbs. (4.8 kg) | 11 lbs. (5.0 kg) |
Grease Jockey Reservoir Options |
||
| Description | Air Pump System | Electric Pump System | Flexible PVC (Capacity) | 10 lbs. (4.5 kg) | 10 lbs. (4.5 kg) |
| Rigid Plastic (Capacity) | 6, 12, 20 lbs. (2.7, 5.4, 9.0 kg) | 6, 12, 20 lbs. (2.7, 5.4, 9.0 kg) |
Grease Jockey Timer |
||
| Description | Air Pump System | Electric Pump System | Electrical | 12-32 VDC | 12 or 24 VDC |
| Component Technology | Solid State | Solid State |
| Operating Temperature Range | 0 to 130 °F (-19 to 55 °C) | 0 to 130 °F (-19 to 55 °C) |
| Enclosure | High impact sealed plastic | Within aluminum pump housing |
| Lube Cycle Frequency | Adjustable from 1/2 hour to 6 hours w/elapsed time memory. | Adjustable from 6 minutes to 8 hours w/elapsed time memory. |
| Lube Cycle On Time | Approximately 45 seconds | Adjustable 10 to 1,000 seconds |
Grease Jockey Injectors |
||
| Description | Air Pump System | Electric Pump System | Output per cycle | 0.002, 0.005, 0.009, 0.0012, 0.020, 0.026 cu. in. | .002, 0.005, 0.009, 0.0012, 0.020, 0.026 cu. in. |
Grease Jockey Supply Lines |
Description | Air Pump System | Electric Pump System |
| Main line from pump | 5/16" O.D. (7.9 mm) heavywall nylon | 5/16" O.D. (7.9 mm) heavywall nylon |
| Distribution line from module | 3/16" O.D. (4.8 mm) heavywall nylon | 3/16" O.D. (4.8 mm) heavywall nylon |
info.lubriquip@lubriquip.com